The industrial building at 1620 N. Ellwood Avenue in Baltimore offers about 17,000 square feet on just under an acre, arranged for distribution, storage and light industrial use. The combination of a clear warehouse floor and a fenced, paved yard gives an operator indoor space for inventory and equipment plus contained outside area on the same site.
The property is enclosed by chain link fencing with a wide gated entry from the street. Paved driving and parking areas wrap the building, so trucks can pull close to the loading doors and vehicles or stored materials can remain within the yard. From above, the layout reads simply, with the rectangular building on one side of the lot and open pavement alongside it for maneuvering and outdoor storage.
Inside, the main work floor is a large open room with a concrete floor, steel columns and an exposed truss ceiling fitted with overhead lighting. Overhead doors are spaced along several walls, allowing forklifts and palletized goods to move between the floor and the yard without crossing through offices. Personnel doors provide separate entry points around the perimeter, which helps keep daily coming and going apart from loading activity.
A finished office area sits at one corner of the building, set apart from the warehouse floor. It includes carpeted rooms suitable for desks, management and paperwork, along with adjoining restrooms and small storage rooms. That arrangement lets office work, records and staff facilities stay close to operations while remaining buffered from noise and movement on the shop floor.
The building is served by gas heat and three phase electric service, practical support for heating a large volume and running shop equipment. It is zoned I-1 for light industrial use. The location suits regional distribution, with the Port of Baltimore about 2.5 miles away, Interstate 95 about 2.4 miles away and BWI about 10.5 miles away, keeping drayage, highway travel and airport access within a short drive.
Strategically located distribution warehouse with fenced in outdoor storage.
The paved and fenced grounds include a gated entry and open pavement beside the building. The arrangement provides contained outside area for vehicles, equipment or stored materials in addition to the indoor warehouse.
Loading is handled through multiple overhead doors spaced along the warehouse walls, opening to the paved yard. Personnel doors provide separate access so staff entry does not depend on the loading doors.
A finished area at one corner of the building includes office rooms, restrooms and small storage rooms. It is set apart from the open warehouse floor while remaining connected for daily operations.